Featured Post

New Post

Popular Post

Keywords: newspaper

  • Reuse and recycle paper and newspaper

    Books, Green crafts, Other crafts, Paper crafts, Recycle  |  0 Commentreuse and recycle paper and newspaper

    Magazine: Weave useful gizmos from the newspapers. Found on the internet

  • Crafty jewelry and more with newspaper

    Green crafts, Jewelry making, Making flower, Paper crafts, Recycle  |  0 Commentcrafty jewelry and more with newspaper

    Magazine: Weave useful gizmos from the newspapers. Found on the internet

  • Recycling work: More design

    Green crafts, Making flower, Paper crafts, Recycle  |  0 Commentrecycling work: more design

    Newspaper as a means of design    

  • Angel made of newspaper tubes

    Christmas's day, Holiday & seasonal crafts, Recycle  |  0 Commentangel made of newspaper tubes

    Recycling newspaper:   Before proceeding to the weaving, we need to crap newspaper tubes. For this we need newspapers, scissors, PVA glue, and a wooden skewer. Newspaper launch Fold in half, long sides together and cut along the fold line. Now fold in half again and again cut it turned out strips of 10 cm in width. Now take a skewer, apply it to the edge of the newspaper at an acute angle Begin spinning newspaper on a skewer Periodically take out the skewer so that it does not uschla into the newspaper Area newspaper smears of glue and paste

  • Easter twist made of newspaper

    Easter's day, Recycle  |  1 Commenteaster twist made of newspaper

    2. So let's begin. We need the newspaper, glue, needle, scissors and a desire to learn to weave 3. paper cut into 4 strips, these strips will twist our tubes. 4. here at such an angle starting to twist the tube, then they are obtained by long and thin. 5. the tip of the tube glue 6. Our tubes are ready, begin to weave 7. I begin this basket weave that's way 4-4x3-3, it will be our basis (the more tubes you will be at the base, the more in diameter, you'll get our braid. In the first photo of 5-5x6-6) 8. Now

  • Newspaper Recycling – Weaving a square (rectangular) boxes

    Recycle  |  0 Commentnewspaper recycling – weaving a square (rectangular) boxes

    I'll try to put photos, as I do the box from A to Z. All this I found in the vast of the Internet.Where exactly, I can not list, both here and in manual work, and the Czech and Polish sites. (All thanks a lot!) Somewhere, as do the bottom, where some bumpers, weaving, cap. My only point-18-two ducts at the corners (not yet met in the internet, or have not noticed, were doing at the corners of one tube), but do not claim authorship, may still find a similar,

  • Basket made of newspaper: tutorial

    Recycle  |  1 Commentbasket made of newspaper: tutorial

    Husband and daughters very much, WHAT I am glad beyond measure! " Materials A box of a shoe. Shilo. Journals old. PVA glue. Brush. Vodoemelesionka. Napkins. Acrylic lacquer. Method of manufacture Took the bottom of the box from under  awl hole. Screw the tubules of the magazines. Inserted a tube into the hole and braided box from a shoe, spying on the Internet. Painted the entire basket vodoemelesionkoy, stuck on the motives of the wipes, Rosochka on PVA glue. Varnished acrylic. Hardship badly two nights only twisted tube, and then weaving, the top would braid weave, did not work, something like a huge zakrepila.Spasibo Lenochka from

  • Recycling newspaper: making rug holding

    Needle crafts  |  0 Commentrecycling newspaper: making rug holding

    The idea that I want to share with you, not mine, she found a very good site about all that can be done with his own hands . All you need to make a stand under a hot - it's old newspapers , glue for paper and a bit of wire. If a little more, then you will need: 4 whole sheet of newspaper , cut into 8 halves scissors adhesive that, when drying becomes transparent and is easily applied needle and (possibly) a thimble , a needle thinner is better with an eye more colored

  • Recycling paper: Frame of newspaper

    Recycle  |  0 Commentrecycling paper: frame of newspaper

    Cut out the cardboard box. Keep in mind that inside somewhere for 5 mm on each side, the frame will be wider at the expense of tubules Paint in the color you want, so you do not shone white. Flatten with your fingers and sticking tubes from the inside. Here I pasted thickly, then delete unnecessary and paste. Must be glued to the distance of 1 mm from each other. Put the burden on top and wait until the stick Bend the tube to the front side frame and