Featured Post

New Post

Popular Post

Kid Pants, the basic pants: sewing patterns

Pants, Sewing  |  September 2nd 2011  |  0 Comment

Kids pants TUTORIAL and PATTERN for kids

sewing patterns

I’ve made these pants from all types of cotton and linen. For this pair I used a black/white cotton seersucker–one of my favorite fabrics of all time. Seersucker breathes well, drapes well, looks darling on kids, and just screams summer.
Fabrics to use (* appx 1/2 to 1 yard of fabric, depending on the size):
Cotton – all types
Linen
Seersucker (pictured above)
Stripes/plaids
Knits
Corduroy
Chambray
Lightweight denim
* Print off the pattern first, make any adjustments for your child’s size, and you’ll know how much fabric is needed. I used a 1/2 yard for this pair.

Okay, with your pattern printed, taped, and cut…
Fold your fabric in half and lay out the pattern. You don’t need to cut anything “on the fold” but you do need TWO Front pieces and TWO Back pieces. Make sure your fabric is folded with the right or wrong sides of your fabric together so that you end up with two Backs that are opposites…the crotches facing in opposite directions.
Trace your pattern to the fabric using a fabric pen or marker.
And cut out the pattern pieces from your fabric.
There are various methods for sewing pants. This is the easiest method for my hands and brain, and the way I sew pants (almost) every time.
Since your front and back pieces are already together, start by sewing down both of the crotches. If your fabric has a Right side to it (mine does not–both sides of my fabric look the same), make sure you flip the pieces before sewing so that the Right sides of the fabric are facing each other.
Using a 3/8 inch seam allowance, start at the waist and sew to the end of the crotch (or vice versa; doesn’t matter). Do this for both front pieces and both back pieces.
Serge off the seams (to keep it from fraying over time) and iron out the seams.
* If you don’t have a serger….do a zigzag stitch or leave the seam raw
* Always, always iron your seams. It will make your clothing look more professional and less homemade.
The front and back of your pants should look like this:
With Right sides of the fabric together, pin the Front and Back pieces together on the In-seam of the legs and sew them together. Start at the bottom of one leg and sew all the way up to the crotch and back down the other leg, in one continuous seam.
Serge off and iron out your seam.
They’re already looking like pants! Easy, right?
With right sides of the fabric together, pin together the outside legs of the pants.
If you have a small side tag, add it to the outside seam, a few inches from the bottom of the leg. And sew down both sides of the pants.
Serge off and iron out your seams.
Let’s make the waistband.
Serge all the way around the waist to finish off the edge and prevent it from fraying over time. If you don’t have a serger, iron the waistband under 1/4 inch, or finish it off with a zigzag stitch.
It should look like this. Notice how the front of the pants in a couple inches shorter. This makes the pants more comfortable and well-fitted.
Elastic.
I prefer a wider waistband on my kid’s pants so I always use 1-inch wide elastic. But 1/2 or 3/4 inch work well too.
Measure around your child’s waist to determine the length of the elastic, and then add 1 inch to that–for overlap and sewing. My son’s waist is 19 inches, so I cut 20 inches of elastic.
Iron the waistband down to create a casing for the elastic. Use the elastic to measure how wide the band needs to be–it should be about 1/4 inch wider on the top and bottom than the elastic.
Mark a start and stop point on your waistband with pins–this is where the elastic will go in and out.
Start at one point and sew all the way around to the other point to make a casing.
Don’t worry if you get any gathers or folds in the waistband. This may happen, due to the pattern and the way the waistband slopes down in front. But no worries! The waist is going to be gathered with elastic and no one will ever notice!
If you’re really concerned though, you can try smoothing the glitches out with a fingernail.
Time to insert the elastic.
Attach a safety pin or Bodkin to one end of the elastic. Insert the elastic into the waistband casing and use another safety pin to attach it to the other end of the pants opening–so the elastic isn’t lost inside the pants.
Feed the elastic all the way through till it comes out the other end.
Before sewing the elastic together, safety pin the two ends together and try the pants on your child to see if adjustments need to be made.
If all is well, overlap the elastic ends by 1 inch and sew them together. I use a tight zigzag stitch and sew in a couple of spots.
* If you’ve sew the elastic and the pants are too big, cut the elastic, cut out a small bit of the elastic–about 1 inch– and resew the ends together.
* If you’ve sewn the elastic and the pants are too small, cut the elastic, and sew in another small piece of elastic, adding more length to your waist.

Sew the casing closed by pulling the waistband taut and sewing off the opening. If you have a clothing label (info on my labels here), add one to the back or inside of the waistband (before sewing the waistband closed)
One final step!–hemming the pants.
Try the pants on your child to determine the hem length. Or, use a pair of existing pants to measure the length.
If you make a wide hem, you’ll be able to let down the hem as your child grows taller.

Serge around the bottom of each pant leg to finish off the edge and keep it from fraying over time. If you don’t have a serger, do a zigzag stitch or iron the edge under 1/4 of an inch.
Iron the hem under to your desired length.
Sew the hem in place, sewing on the inside of the hem to make sure you catch the entire hem.
For decorative aesthetic, sew a second line on the outside of the hem, about 1/4 over from the first hemline.
And…..you’re done!
Try them on!

Source: dana-made-it.com