Fashion and recycling for kids: Faux Chenille Capri Pants tutorial

These are two pairs of jeans that were recently cut.  The pair on the top was cut above the knee and then hemmed using a zigzag stitch.  I used gold thread to match the gold thread in the cute floral embroidery. Now, see how the pair on the bottom is just, well, just plain and simple. I took it from plain to WOW…much better.

So let’s jump right into a simple and easy way to spruce up your jeans, or capri pants or shorts or skirts…anything really. First, cut your pant legs a little above the knee.

Now look at the inner and outer seams. You want to use a seam ripper to open the seam that does not have the double stitching on the outside.  If I lost you, just look for the seam that looks like this picture…

and rip open that seam.  Since my seam was on the outside, I opened it up to the pockets.

If your seam is inside, then open right before the crotch. This piece of the pants will be referred to Part A.  Now, do the same for the pant legs you cut off. This leg piece will be referred to Part B.

(I used scissors to cut open the pant legs because the legs were flared giving me more material to work with.)

Then place Part A (wrong side up) flat on a table, first.  Place Part B (wrong side up) overlapping Part A. The seam ripper is touching Part A. Don’t worry if the seams don’t line up.  Trust me, it won’t matter in the end. You want to make sure that the pieces overlap each other at least 8 inches.  Pin these two pieces together; just enough to hold it together to get it to your sewing machine.

Now just sew straight lines about an inch apart making sure to sew both pieces together. I sewed several straight lines and then went back and did a zigzag stitch just for decoration but you can skip this part.

Once you are done stitching, VERY CAREFULLY, cut a straight line between two rows of stitch making sure to ONLY cut the TOP layer of your pant leg.

Now match up your hem lines…

 and starting at the hem, pin up the sides and sew your pant leg closed.  (I also finished off the inseam with a zigzag stitch and it’s up to you if you want to skip this step.)  It is easier to make adjustments when sewing up from the hem than having your hems not match up if you start from the top and work down.

Just follow the previous stitching that you picked out earlier.  Don’t worry if the stitching doesn’t line up, it won’t matter once the pants are done.  What is important is for the hems to match up. Trust me.

One leg down…one to go.

Repeat the same for the other leg making sure to measure the finished leg against the
unfinished one to get the correct length on both legs.

Once both legs are finished…

wash the pants…and trim off the frayed hairy mess.  Below, the top leg is a frayed mess while the bottom leg is well groomed and trimmed.  And the added bonus to this is that you don’t have to hem the bottom!

Here is the final, finished and polished capri pants.

See how even though the fraying doesn’t line up, the pants still look hip and fashionable.

Back view 

Fray goodness….

  

These are two pairs of jeans that were recently cut.  The pair on the top was cut above the knee and then hemmed using a zigzag stitch.  I used gold thread to match the gold thread in the cute floral embroidery. Now, see how the pair on the bottom is just, well, just plain and simple. I took it from plain to WOW…much better. 

So let’s jump right into a simple and easy way to spruce up your jeans, or capri pants or shorts or skirts…anything really. First, cut your pant legs a little above the knee.

source: rocaandcompany.blogspot.com